Multifocal ERG wavelet packet decomposition applied to glaucoma diagnosis

<p>Abstract</p> <p>Background</p> <p>Glaucoma is the second-leading cause of blindness worldwide and early diagnosis is essential to its treatment. Current clinical methods based on multifocal electroretinography (mfERG) essentially involve measurement of amplitudes and latencies and assume standard signal morphology. This paper presents a new method based on wavelet packet analysis of global-flash multifocal electroretinogram signals.</p> <p>Methods</p> <p>This study comprised twenty-five patients diagnosed with OAG and twenty-five control subjects. Their mfERG recordings data were used to develop the algorithm method based on wavelet packet analysis. By reconstructing the third wavelet packet contained in the fourth decomposition level (ADAA4) of the mfERG recording, it is possible to obtain a signal from which to extract a marker in the 60-80 ms time interval.</p> <p>Results</p> <p>The marker found comprises oscillatory potentials with a negative-slope basal line in the case of glaucomatous recordings and a positive-slope basal line in the case of normal signals. Application of the optimal threshold calculated in the validation cases showed that the technique proposed achieved a sensitivity of 0.81 and validation specificity of 0.73.</p> <p>Conclusions</p> <p>This new method based on mfERG analysis may be reliable enough to detect functional deficits that are not apparent using current automated perimetry tests. As new stimulation and analysis protocols develop, mfERG has the potential to become a useful tool in early detection of glaucoma-related functional deficits.</p

Analysis of gamma-band activity from human EEG using empirical mode decomposition

The purpose of this paper is to determine whether gamma-band activity detection is improved when a filter, based on empirical mode decomposition (EMD), is added to the pre-processing block of single-channel electroencephalography (EEG) signals. EMD decomposes the original signal into a finite number of intrinsic mode functions (IMFs). EEGs from 25 control subjects were registered in basal and motor activity (hand movements) using only one EEG channel. Over the basic signal, IMF signals are computed. Gamma-band activity is computed using power spectrum density in the 30–60 Hz range. Event-related synchronization (ERS) was defined as the ratio of motor and basal activity. To evaluate the performance of the new EMD based method, ERS was computed from the basic and IMF signals. The ERS obtained using IMFs improves, from 31.00% to 73.86%, on the original ERS for the right hand, and from 22.17% to 47.69% for the left hand. As EEG processing is improved, the clinical applications of gamma-band activity will expand.Universidad de AlcaláInstituto de Salud Carlos II

Coding Prony's method in MATLAB and applying it to biomedical signal filtering

Background:The response of many biomedical systems can be modelled using a linear combination of damped exponential functions. The approximation parameters, based on equally spaced samples, can be obtained using Prony's method and its variants (e.g. the matrix pencil method). This paper provides a tutorial on the main polynomial Prony and matrix pencil methods and their implementation in MATLAB and analyses how they perform with synthetic and multifocal visual-evoked potential (mfVEP) signals. This paper briefly describes the theoretical basis of four polynomial Prony approximation methods: classic, least squares (LS), total least squares (TLS) and matrix pencil method (MPM). In each of these cases, implementation uses general MATLAB functions. The features of the various options are tested by approximating a set of synthetic mathematical functions and evaluating filtering performance in the Prony domain when applied to mfVEP signals to improve diagnosis of patients with multiple sclerosis (MS). Results:The code implemented does not achieve 100%-correct signal approximation and, of the methods tested, LS and MPM perform best. When filtering mfVEP records in the Prony domain, the value of the area under the receiver-operating-characteristic (ROC) curve is 0.7055 compared with 0.6538 obtained with the usual filtering method used for this type of signal (discrete Fourier transform low-pass filter with a cut-off frequency of 35&#8201;Hz). Conclusions:This paper reviews Prony's method in relation to signal filtering and approximation, provides the MATLAB code needed to implement the classic, LS, TLS and MPM methods, and tests their performance in biomedical signal filtering and function approximation. It emphasizes the importance of improving the computational methods used to implement the various methods described above.Universidad de AlcaláSecretaría de Estado de Investigación, Desarrollo e Innovació

Identification of clusters in multifocal electrophysiology recordings to maximize discriminant capacity (patients vs. control subjects)

Purpose To propose a new method of identifying clusters in multifocal electrophysiology (multifocal electroretinogram: mfERG; multifocal visual-evoked potential: mfVEP) that conserve the maximum capacity to discriminate between patients and control subjects. Methods The theoretical framework proposed creates arbitrary N-size clusters of sectors. The capacity to discriminate between patients and control subjects is assessed by analysing the area under the receiver operator characteristic curve (AUC). As proof of concept, the method is validated using mfERG recordings taken from both eyes of control subjects (n = 6) and from patients with multiple sclerosis (n = 15). Results Considering the amplitude of wave P1 as the analysis parameter, the maximum value of AUC = 0.7042 is obtained with N = 9 sectors. Taking into account the AUC of the amplitudes and latencies of waves N1 and P1, the maximum value of the AUC = 0.6917 with N = 8 clustered sectors. The greatest discriminant capacity is obtained by analysing the latency of wave P1: AUC = 0.8854 with a cluster of N = 12 sectors. Conclusion This paper demonstrates the effectiveness of a method able to determine the arbitrary clustering of multifocal responses that possesses the greatest capacity to discriminate between control subjects and patients when applied to the visual field of mfERG or mfVEP recordings. The method may prove helpful in diagnosing any disease that is identifiable in patients’ mfERG or mfVEP recordings and is extensible to other clinical tests, such as optical coherence tomography

Empirical mode decomposition-based filter applied to multifocal electroretinograms in multiple sclerosis diagnosis

As multiple sclerosis (MS) usually affects the visual pathway, visual electrophysiological tests can be used to diagnose it. The objective of this paper is to research methods for processing multifocal electroretinogram (mfERG) recordings to improve the capacity to diagnose MS. MfERG recordings from 15 early-stage MS patients without a history of optic neuritis and from 6 control subjects were examined. A normative database was built from the control subject signals. The mfERG recordings were filtered using empirical mode decomposition (EMD). The correlation with the signals in a normative database was used as the classification feature. Using EMD-based filtering and performance correlation, the mean area under the curve (AUC) value was 0.90. The greatest discriminant capacity was obtained in ring 4 and in the inferior nasal quadrant (AUC values of 0.96 and 0.94, respectively). Our results suggest that the combination of filtering mfERG recordings using EMD and calculating the correlation with a normative database would make mfERG waveform analysis applicable to assessment of multiple sclerosis in early-stage patients

Práctica de laboratorio de captura de energía de radio frecuencia

X Congreso de Tecnologías Aplicadas a la Enseñanza de la Electrónica, Vigo, 13-15 de junio de 2012.La obtención de energía por medios alternativos, amigables con el medio ambiente, y que no dependan de baterías contaminantes a las que haya que recargar y asegurar un mantenimiento periódico, se plantea como una opción interesante en la alimentación de sistemas electrónicos autónomos de bajo consumo. En este trabajo se presenta una práctica de laboratorio que permite obtener energía eléctrica a partir de una señal de radio frecuencia (RF). El alumno aprende a diseñar y a caracterizar una antena de parche básica, comprende el proceso de sintonización de señales de RF y comprueba el funcionamiento del sistema. También se plantean posibles ampliaciones y modificaciones que ayudan al alumno a enriquecer su conocimiento sobre potenciales aplicaciones de los sistemas de captura de energía de RF. Se incluye finalmente la opinión de los alumnos que han realizado esta práctica en el laboratorio durante tres cursos académicos

Data Acquisition, Analysis and Transmission Platform for a Pay-As-You-Drive System

This paper presents a platform used to acquire, analyse and transmit data from a vehicle to a Control Centre as part of a Pay-As-You-Drive system. The aim is to monitor vehicle usage (how much, when, where and how) and, based on this information, assess the associated risk and set an appropriate insurance premium. To determine vehicle usage, the system analyses the driver’s respect for speed limits, driving style (aggressive or non-aggressive), mobile telephone use and the number of vehicle passengers. An electronic system on board the vehicle acquires these data, processes them and transmits them by mobile telephone (GPRS/UMTS) to a Control Centre, at which the insurance company assesses the risk associated with vehicles monitored by the system. The system provides insurance companies and their customers with an enhanced service and could potentially increase responsible driving habits and reduce the number of road accidents

Sensory System for Implementing a Human—Computer Interface Based on Electrooculography

This paper describes a sensory system for implementing a human–computer interface based on electrooculography. An acquisition system captures electrooculograms and transmits them via the ZigBee protocol. The data acquired are analysed in real time using a microcontroller-based platform running the Linux operating system. The continuous wavelet transform and neural network are used to process and analyse the signals to obtain highly reliable results in real time. To enhance system usability, the graphical interface is projected onto special eyewear, which is also used to position the signal-capturing electrodes

Continuous‑wavelet‑transform analysis of the multifocal ERG waveform in glaucoma diagnosis

The vast majority of multifocal electroretinogram (mfERG) signal analyses to detect glaucoma study the signals’ amplitudes and latencies. The purpose of this paper is to investigate application of wavelet analysis of mfERG signals in diagnosis of glaucoma. This analysis method applies the continuous wavelet transform (CWT) to the signals, using the real Morlet wavelet. CWT coefficients resulting from the scale of maximum correlation are used as inputs to a neural network, which acts as a classifier. mfERG recordings are taken from the eyes of 47 subjects diagnosed with chronic open-angle glaucoma and from those of 24 healthy subjects. The high sensitivity in the classification (0.894) provides reliable detection of glaucomatous sectors, while the specificity achieved (0.844) reflects accurate detection of healthy sectors. The results obtained in this paper improve on the previous findings reported by the authors using the same visual stimuli and database.Ministerio de Ciencia e Innovació

Improved measurement of intersession latency in mfVEPs

Purpose: The purpose of the study is to present a method (Selfcorr) by which to measure intersession latency differences between multifocal VEP (mfVEP) signals. Methods: The authors compared the intersession latency difference obtained using a correlation method (Selfcorr) against that obtained using a Template method. While the Template method cross-correlates the subject’s signals with a reference database, the Selfcorr method cross-correlates traces across subsequent recordings taken from the same subject. Results: The variation in latency between intersession signals was 0.8 ± 13.6 and 0.5 ± 5.0 ms for the Template and Selfcorr methods, respectively, with a coefficient of variability C V_TEMPLATE = 15.83 and C V_SELFCORR = 5.68 (n = 18, p = 0.0002, Wilcoxon). The number of analyzable sectors with the Template and Selfcorr methods was 36.7 ± 8.5 and 45.3 ± 8.7, respectively (p = 0.0001, paired t test, two tailed). Conclusions: The Selfcorr method produces smaller intersession mfVEP delays and variability over time than the Template method.Ministerio de Ciencia e Innovació